Rapid Mixer Granulator Machine

Rapid Mixer Granulator Machine

Rapid Mixer Granulator Machine

Rapid Mixer Granulator is used for mixing and granulation at optimum operating cost along with higher productivity. Better mixing and closed control of granule size is achieved. Speeds of main motor and chopper motor can be controlled.

Salient Features Of Rapid Mixer Granulator

  • Complete Gmp Model

  • All contact parts made from stainless steel 316 with non contact parts made from stainless steel 304

  • MS Structure is fully covered with stainless steel 304 Covers/Claddings

  • All contact parts are mirror polished to 220 grit and external surfaces to matt finish of 180 grit

  • Homogeneous binder distribution

  • Short batch time and reduce cleaning time

  • Maximize cip effectiveness

  • Air purge sealing system for main stirrer shaft and granulator shaft

  • All internal contact parts are polished to the mirror finish

  • A high-speed granulator is inserted horizontally through wall of bowl to assist blending of powder and to break the product to the granules of required size

  • The seal housing and drive shaft may be flushed with cleaning water, which is then drained away from the machine through built in drain tubes

  • Granulator motor is provided with a removable stainless steel shroud which covers the motor and simplify cleaning

  • All moving parts of the machine are totally enclosed to eliminate accident

  • The machine can not be started unless and until the mixer cover is property closed

  • Flush wall type discharge valve eliminates pockets at the port of discharge valve

Process Operation Of Rapid Mixer Granulator

  • Rapid mixer granulator working principles are based on two decisive factors essential for the intimate mixing system

  • Spinning close to bottom of mixing bowl

  • The impeller sets the entire mixture in whirling rising

  • Tumbling motion ensuring a quick & even distribution of all dry components. This leads to an even distribution of all dry components & an even wetting of every granule

  • The large lumps occurred during wet mixing are broken up by the strategically acted chopping tool rotating at 1440/2880 rpm

  • The mixture can be discharged with the impeller running through outlet located on the side of the mixing bowl flush to the bottom. Easy accessibility for cleaning is guaranteed by the low profile. The mixing tool is easily removed from the drive shaft providing an unobstructed mixing area which may be cleaned very easily

Technical Specification

Model Gross Capacity IN LTR Working Capacity IN LTR Main Motor [HP] Impeller Motor RPM Chopper Motor HP Chopper Motor RPM Weight IN KGS Approx Dimension [L X W X H] LID Opening Height IN MM Approx
PM-RMG-10 10 LTR 8 2/3 HP 75/150 1/1.5 HP 1500/3000 425 1450 X 600 X 950 1060
PM-RMG-25 25 LTR 20 3/5 HP 75/150 1/1.5 HP 1500/3000 650 1800 X 1200 X 1400 1600
PM-RMG-100 100 LTR 80 7.5/10 HP 75/150 2/3 HP 1500/3000 1400 1900 X 1300 X 1450 2150
PM-RMG-150 150 LTR 120 10/12.5 HP 75/150 3/5 HP 1500/3000 1600 2100 X 1900 X 1500 2300
PM-RMG-250 250 LTR 200 22/30 HP 100/150 3/5 HP 1500/3000 2000 2150 X 1900 X 1650 2550
PM-RMG-400 400 LTR 320 30/40 HP 100/150 5/7.5 HP 1500/3000 2500 2750 X 2420 X 1900 2950
PM-RMG-600 600 LTR 480 40/50 HP 100/150 5/7.5 HP 1500/3000 3000 2850 X 2530 X 2070 3250

Power & voltage can be adjusted as per customer domestic power voltage requirement.

Rights of technical improvement & modification reserved.

Illustration & dimension are shown for information purpose only.